HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 581)

HEIDENHAIN MANUALplus 620, CNC PILOT 640 581
7.
5 F
u
ll-surf
ace mac
h
ining with TURN PLUS
Parting and picking-off the workpiece with the
opposing spindle
The subprogram for "parting and picking-off with the opposing spindle"
is defined in the user parameter Parameter list – rechucking,
parting
(standard program: Rechuck_complete.ncs).
At the end of the machining sequence, define a machining step with
the parting main machining operation and the full-surface
machining
submachining operation.
In parameter D of the chucking equipment description, select the main
spindle for the first chucking equipment and the opposing spindle for
the second chucking equipment.
Beispiel: Defining the chucking equipment
. . .
CLAMPS 1
H0 D0 R0 J100 K15 X120 Q4 V0
CLAMPS 2
H0 D3 R1 J15 K-15 X68 Q4 V0
. . .