HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 574)

574 TURN PLUS
7.
4 Example
7.4 Example
On the basis of the production drawing, the working steps for defining
the contour of the blank and finished part, the setup procedures and
automatic working plan generation are explained.
Workpiece blank: Ø60 X 80; Material: Ck 45
Creating a program
 Select "Program > New > New DINplus Program." The control opens
the "Save as" dialog box.
 Enter a program name and press the "Save" soft key.
 The control opens the "Program head (short)" dialog box.
 Select a material from the fixed-word list and press the "OK" soft
key.
Workpiece blank definition
 Select "ICP > Blank > Bar." TURN PLUS opens the "Bar" dialog box.
 Inputs:
 Diameter X = 60 mm
 Length Z = 80 mm
 Oversize K = 2 mm
 TURN PLUS displays the workpiece blank.
 Press the "Back" soft key to return to the main menu.
 Undefined chamfers: 1x45°
 Undefined radii: 1 mm