Grass Valley EDIUS Neo 2 - Manual (Page 565)

EDIUS Neo — User Reference Guide 565
Generic OHCI Settings
Note When displaying interlaced images the ‘Field” refresh rate provides the best
setting for visually checking for errors such as reversed fields.
• Field (at a frame rate of 29.97 fps, the screen is refreshed 59.94 times per
second) - default
• Frame (at a frame rate of 29.97 fps, the screen is refreshed 29.97 times
per second
Note With progressive images, there is no difference between the two settings.
5. Select the Overlay Refresh setting. Unless video preview does not
display properly, this setting should be left at “None.”
Note This option is enabled only if specific devices and their software are installed
on the EDIUS Neo computer.
• None (no refresh is performed. This setting provides the highest speed)
- default
• Lock/Unlock (relatively high speed video processing)
• Update Overlay (lowest speed video processing)
6. Click the OK button to save changes and exit the dialog.
Note EDIUS Neo must be restarted for any changes in Video Overlay settings to
take effect.
Generic OHCI Settings
Generic OHCI Settings are accessed by selecting Settings>Hardware Set-
tings from the Preview window and then selecting Generic OHCI Settings.
Note If the Hardware Settings tree is collapsed, click the “+” to expand the tree.
There are three settings dialogs for Generic OHCI devices; “System/
Output Settings”, “DV Device Settings” and “Video Overlay Settings.”
System/Output Settings
To define System/Output Settings for a generic OHCI device, do the fol-
lowing:
1. If necessary, click the “+” to expand the Generic OHCI Settings tree.
Select “System/Output Settings” from the Generic OHCI Settings tree. The
dialog in
Figure 716 appears.