Line as illustrated in, Figure 243 – Grass Valley EDIUS Neo 2 User Manual
Page 222

222
EDIUS Neo — User Reference Guide
Section 5 — Timeline Operations
Figure 243. Extend Mode Example
When adding a transition or audio cross fade, the In/Out points of the clips
before and after the transition extend with the length of the transition. The
net result is that the overall sequence length does not change. See
.
Figure 244. Transition Added - Extend Mode
Note
If a clip does not have a margin, transition/audio cross fade cannot be set
(except in the Mixer area). A transition/cross fade length can only be
extended by the amount of margin in a clip.
When a transition or audio cross fade between clips is deleted, the In/Out-
points of the clips before and after the transition contract by an amount
equal to the length of the transition and the overall sequence length
remains unchanged. See
Figure 245. Transition Deleted - Extend Mode
Note
When one of the clips with the transition is deleted, the transition is deleted
as well. The length of the remaining clip changes and extends to the mid-
point location of the deleted transition.