Grass Valley EDIUS Neo 2 - Manual (Page 31)

EDIUS Neo — User Reference Guide 31
Start-Up Window
To create a new project from the current project, do the following:
1. Perform any of the three actions listed above to initiate the creation of a
new project.
After performing any of these actions, a dialog prompting to save the
current project file appears. See
Figure 15 .
Figure 15. Save Current Project Dialog
2. Click Yes to save the current project.
The Project settings dialog box shown in Figure 16 appears.
Figure 16. Project Settings Dialog
3. Enter a name for the project in the Project name field.
4. Select a project folder and the “Create project name folder” option if
desired.
5. Select the desired project preset and click the OK button.
Note If you wish to create a new project preset, click the New Preset button and
follow the instructions to Create a Project Preset
on page 25 .