Lustrated in, Figure 256 – Grass Valley EDIUS Neo 2 User Manual
Page 229
EDIUS Neo — User Reference Guide
229
Timeline Settings
Note
Track height may be adjusted from 1 height unit to 5 height units which may
vary by track. The currently selected track height is indicated by the check
mark.
Figure 256. Adjust Track Panel Height
The track height is changed according to your selection.
To adjust the height of all tracks simultaneously, do the following:
1.
Right-click on the sequence tab.
2.
Select Track Height>[height unit] from the menu as illustrated in
.
Figure 257. Adjust Height of All Tracks
The height of all tracks is adjusted according to your selection.
Note
Tracks height will be adjusted according to current expand settings.
When viewing waveforms, it is often desirable to increase track height in
order to better view the peaks and valleys in audio waveforms as illus-
trated in
.