Grass Valley EDIUS Neo 2 - Manual (Page 520)

520 EDIUS Neo — User Reference Guide
Section 7 — Audio Operations
Figure 675. Voice Over Dialog
3. Click the list button (V) on the Device button and select an input device
from the list of available devices.
4. Click the list button (V) on the Channel button and select an audio
source (microphone, line-in, aux, etc).
Note The Voice Over dialog options may change depending upon the selected
source. For example, if a monaural source is selected, the volume and meter
bar displays change to monaural.
5. Adjust the volume of the source with the Volume slider.
Note Maximum volume setting is 0 dB.
6. Click the list button (V) on the Output button and select “Track” from the
Output list.
• Bin - Add the audio clip only in the Asset Bin
• Track - Add the audio clip to the A track specified in Step 1 .
7. In the File name field, enter the desired name for the audio clip and
select the location in which to store the clip by clicking the
... button.
8. Prepare the source (microphone, line-in, aux, etc), and click the Start
button.