Grass Valley EDIUS Neo 2 - Manual (Page 23)

EDIUS Neo — User Reference Guide 23
Entering Numeric Data
Direct Input
The direct input method requires entering the numeric values from the key-
board. To enter a numeric value with the direct input method do the fol-
lowing:
1. Select the desired input field.
2. To enter, for example, the value 25 minutes, 16 seconds and 15 frames
use one of the following methods:
a. enter 25M16S15F
b. enter 251615
3. Press the [Enter] key.
Note When entering a number such as 1 hour and 15 minutes with no seconds and
frames, enter either 1H10M or 01150000. 10 minutes is entered as either
10M or 100000. 2 hours is entered as either 2H or 02000000.
Offset Input
The offset input method is used to quickly increment or decrement an
existing timecode by a particular value.
Note Offset input is only available with timecode (multi-segment) values.
To enter a timecode offset, follow these steps:
1. Select the desired input field.
2. Enter the desired offset value.
A “+” before the value increments the timecode by the specified value.
A “-” before the value decrements the timecode by the specified value.
Note If the timecode value in a particular field is 00:05:35;20 (5 minutes, 35 sec-
onds, 20 frames), entering an offset value of +2510 will increment the time-
code value to 00:06:01;00 (assuming a 30 frame per second video standard).
Entering an offset value of -2510 will decrement the timecode to 00:05:10;10.
3. Press the [Enter] key.
Arrow Key Input
With the arrow key input method, the arrow keys (K,L,I,J) are used to
enter or change numeric values.
To enter numbers using the arrow key input method, do the following:
1. Select the desired input field.