Grass Valley EDIUS Neo 2 - Manual (Page 558)

558 EDIUS Neo — User Reference Guide
Section 8 — Exporting/Project Output
Figure 712. Tape Export Wizard Confirmation Dialog
10. Click the Export button to begin exporting to tape.
Click the Abort button during the export operation if you wish to cancel the
export.
Note If In and Out points are set on the Timeline, only the portion of the project
between these points is exported.
Export to Devices Not Controlled by Capture Settings
Some external playback/recording devices cannot be controlled (started,
stopped, etc) from EDIUS Neo. Capture Settings (see Capture Settings
on
page 86 for more information) do not apply to these devices and all source
control operations must be performed manually on the device.
To export to a device not controlled by deck settings, do the following:
1. Connect the device to the EDIUS Neo computer.
2. Set the device to external input for recording.
3. Click Play button in the Recorder.
Export begins
4. Click the Stop button in the Recorder, to stop exporting to the
external device.