Grass Valley EDIUS Neo 2 - Manual (Page 517)

EDIUS Neo — User Reference Guide 517
Deleting or Initializing Rubber Band Points
Figure 670. Volume/Pan Right-Click Menu
4. Select the desired action from the menu.
• Add/Delete - Delete the selected rubber band point.
• Delete All - Delete all points on the selected rubber band and ini-
tialize the rubber band to the default position.
• Initialize All - Initialize all points on the selected rubber band to the
default position without deleting the points.
Applying V-Mute
V-mute allows you to specify a point on the audio waveform Timeline at
which the audio should be muted. This is useful for eliminating small
amounts of unwanted audio noise. This noise will likely be visible in the
audio waveform. To V-mute audio, do the following:
1. If the audio waveform is not currently displayed for the track on with
you wish to set a V-mute, click the Expand button on the track panel.
See
Figure 671 .
Figure 671. Audio Track Expand