Nu in, Figure 192 – Grass Valley EDIUS Neo 2 User Manual
Page 184
184
EDIUS Neo — User Reference Guide
Section 4 — Clip Operations and Management
Figure 192. Mark In Menu
2.
Select “Set Video In” or “Set Audio In” to mark an In point for video or
audio only.
3.
Set the desired video or audio Out point.
Note
The procedure is the same for marking an Out point for video or audio only
except the list button (
V) on the Out button is clicked.
You may also set the
In
and
Out
buttons to one of three modes such that
clicking on the button sets the In or Out point according to the selected
mode:
•
Video Only
•
Audio Only
•
Video and Audio
To change the
In/Out
button mode, click the In/Out toggle button in the
bottom left corner of the Player window (see
).
Figure 193. In/Out Mark Toggle Button
The
In
and
Out
mark the In and Out point for both
audio and video as there is no video or audio symbol on the buttons.