Grass Valley EDIUS Neo 2 - Manual (Page 150)

150 EDIUS Neo — User Reference Guide
Section 3 — Capturing and Importing Clips and Stills
Note Pressing [F9] on the keyboard will also initiate the capture process.
Figure 146. Player Capture Button
The Capture dialog appears and capturing begins.
6. Start or resume playback on the external playback device containing
the source.
7. When the source has been played back to the point at which you wish
to stop capturing, click the
Stop button in the Capture dialog.
The captured clip is places in the Asset Bin
8. Stop playback on the external playback device.
Capturing Directly to the Timeline
Normally, captured clips are placed only in the Asset bin at the conclusion
of the capture process; however, you can capture clips directly to the Time-
line for immediate editing. To capture directly to the Timeline, do the fol-
lowing:
1. Select the VA track on which you wish to place the captured clip.
Figure 147. Capture to Timeline
2. Move the Timeline cursor to the point at which you wish to insert the
captured clip. In
Figure 147 , the cursor is at the 00:03:05;00 mark.
3. Playback the source and set the desired In and Out points.
Note Setting no In and Out points causes the entire source to be captured.
4. Click the Insert to Timeline or Overwrite to Timeline button. See Figure 148 .