Grass Valley EDIUS Neo 2 - Manual (Page 152)

152 EDIUS Neo — User Reference Guide
Section 3 — Capturing and Importing Clips and Stills
3. Click the Add to Batch Capture List button (click the button icon not the list
button) to add the selected clip to the batch capture list.
Note Pressing [CTRL]+[B] on the keyboard also adds clips to the batch capture
list.
4. Repeat steps 2 and 3 for all clips you wish to capture.
Note To capture additional clips from the same source, clear the previous In and
Out points after adding the clip to the batch capture list.
5. After adding all desired clips to the batch capture list, click the list
button (V) of the
Add to Batch Capture List button and select “Batch
Capture” from the menu. See Figure 149 .
Note You may also select Capture>Batch Capture on the Preview window to open
the batch capture list.
The batch capture dialog in Figure 151 appears.
Figure 151. Batch Capture Dialog
Note If a reel name was set while defining Input Settings, it will be displayed in the
Batch Capture dialog. See Setting Reel Name
on page 135 for more informa-
tion.
6. De-select (remove the check mark) any clips you may want to exclude
from the batch capture.
Note As clips are added to the batch capture list, they are automatically selected
for inclusion in the batch capture.