Grass Valley EDIUS Neo 2 - Manual (Page 402)

402 EDIUS Neo — User Reference Guide
Section 6 — Effects and Titles
4. Double-click the transition indicator (on an area other than the In/Out
points or cut points) to display the transition settings dialog. The
transition configuration dialog for the Dissolve transition effect is
illustrated in
Figure 486 . The Settings dialog differs for each transition
effect.
Note If the transition indicator is small and there is no area to double-click to open
the settings dialog, right-click the transition indicator and select “Settings”
from the menu or double-click the transition effect in the Information Palette.
Figure 486. Dissolve Transition Settings Dialog
Make any desired changes to the transition effect settings and click the OK
button to close the dialog.
Track Transitions
Transitions may be applied in the mixer area at the point where clips tran-
sition on a track. To add a track transition, do the following:
1. Select “Transitions” in the Effect Tree of the Effect Palette.
2. Select the desired transition type from the effect view (see Figure 484 )
or the Effect>Transitions tree if the effect view is hidden.