Changing speed of multiple clips, Video display layout/crop – Grass Valley EDIUS Neo 2 User Manual
Page 284
284
EDIUS Neo — User Reference Guide
Section 5 — Timeline Operations
3.
Select one of the Processing Options for reducing video flicker in slow
motion scenes.
•
Deinterlace when speed is below 100%
•
Always Deinterlace
•
None
4.
Select the Nearest Neighbor option, if desired, to interpolate the length
of a slow motion clip by displaying the same frame as needed.
5.
Click the
OK
button.
Note
Playback speed cannot be changed for clips in the VA track that have been
split trimmed. See Ripple Trim
for more information.
Changing Speed of Multiple Clips
The playback speed can be changed simultaneously for multiple selected
clips if the following conditions apply to all selected clips:
•
Clips have the same start point
•
Clips have the same length
•
Clips have the same playback speed
•
Clips have no transitions or audio cross fades applied
•
The ‘Duration on Timeline is changed” option is deselected (Off)
Note
If an attempt is made to change the playback speed of multiple selected clips
with the “Duration of Timeline is changed” option selected (On), an error
dialog appears indicating which conditions above do not match the require-
ments.
Video Display Layout/Crop
The display range or aspect ratio of the display may be changed.
To change the video display range, do the following:
1.
Right-click the video portion of a clip on a V or VA track on the
Timeline.
2.
Select “Layout” from the menu as shown in
.