Grass Valley EDIUS Neo 2 User Manual
Page 149
EDIUS Neo — User Reference Guide
149
Capturing from Devices Not Controlled by Capture Settings
•
DVD Video Settings
•
Separate files when capturing DVD Video (select one)
•
At each Program - creates a separate capture file for each sepa-
rate DVD file.
•
At each Chapter - creates a separate capture file for each chapter
in the DVD file(s).
•
Re-construct files when capturing DVD video - If some captured
files cannot be played, selecting this option may make it possible to
playback captured files that were recorded by a DVD recorder.
•
Segment Encode files - If the “re-construct ...” option above is
selected, this setting re-encodes only the necessary parts of the file.
•
DVD-VR Settings
•
Separate files when capturing DVD Video (select one)
•
At each Program - creates a separate capture file for each sepa-
rate DVD-VR file.
•
At each Cell - creates a separate capture file for each cell in the
DVD-VR files.
Note
“At each Cell” divides the files into small units which may result in MPEG files
that are incompatible with the MPEG standard and cannot be played back
when imported into the stream.
Capturing from Devices Not Controlled by Capture Settings
Some external playback devices cannot be controlled (started, stopped, etc)
from EDIUS Neo. Capture Settings (see Capture Settings
for more
information) do not apply to these devices and all source control operations
must be performed manually on the device.
To capture clips from a device not controlled by capture settings, do the fol-
lowing:
1.
On the external device, go to the point in the source at which you wish
to begin capturing and stop or pause the device.
2.
Select Capture>Input Settings in the Preview window.
The Input Settings dialog appears (see
.)
3.
Select the external input device name and input format.
4.
Click the
OK
button.
5.
Click the
Capture
button in the Player. See