Grass Valley EDIUS Neo 2 User Manual
Page 295
EDIUS Neo — User Reference Guide
295
Trimming Clips
Figure 343. Single-Mode Trim Window
Note
Depending upon the screen layout, display mode, project aspect ratio and
other factors, your Trim Mode display may not appear exactly as represented
here.
Alternative Methods:
•
Double-click the In or Out point of a clip
•
Right-click on a clip and select “Trim” from the right-click menu.
Any of the following will switch the display from Trim Mode to Normal
Mode:
•
Select Mode>Normal or Mode>Trimming from the Preview window
menu bar.
•
Click the
[X
] in the lower right corner of the Trim Mode window
•
Press the
[F6]
key on the keyboard
Note
[F6] toggles Trim Mode on and off.
•
Press the
[F5]
key to switch to Normal Mode.
shows the Trim Mode operation buttons. This tool bar is avail-
able only while in trim mode.
Figure 344. Trim Mode Operation Buttons