Grass Valley EDIUS Neo 2 - Manual (Page 401)

EDIUS Neo — User Reference Guide 401
Adding Effects Between Clips
2. Select the desired transition type from the effect view (see Figure 484 )
or the Effect>Transitions tree if the effect view is hidden.
Figure 484. Effect Palette - Transitions Effect View
3. Drag and drop the selected transition effect at the point where the clips
touch each other on the Timeline.
The transition indicator is added between the clips as illustrated in
Figure 485 .
Note The default audio cross fade is also added when a video transition is added.
If you wish to disable the automatic addition of the audio cross fade, see
Insert Default Cross Fade in Transition
on page 72 in Timeline Settings .
Figure 485. Transition Indicator Between Clips