Grass Valley EDIUS Neo 2 - Manual (Page 553)

EDIUS Neo — User Reference Guide 553
Exporting in Various File Formats
7. Select advanced still image save parameters, if desired, by clicking the
Advanced button. The Advanced Settings dialog in Figure 705 appears.
Figure 705. Advanced Still Image Save Settings
8. Click the Save Single Picture button or the Save between In/Out in sequential
files button to save still image(s) to the selected location.
Save Single Picture
Exports the frame at the Timeline cursor position as a still image.
Save Between In/Out in Sequential Files
Exports all frames between In and Out points on the Timeline as still
image files. 8-digit sequential numbers are added to the end of each file
name.
Images are exported as explained above depending on the selected file save
button.
9. Click the Close button to close the Still Image Exporter.
Export to Tape
Projects may be exported to tape on any device than can be connected to
and controlled by the EDIUS Neo computer and many devices through
which control via deck settings is not possible.
Output to HDV (Generic HDV) Device
To output an HDV file (.m2t format) to a tape in an HDV device, do the fol-
lowing:
1. Connect the HDV device to the IEEE1394 port on the EDIUS Neo
computer with a FireWire/IEEE1394 cable.
Note If the HDV device supports HDV mode, set the device to this mode. For more
information see the instruction manual for the HDV device.