Ivoclar Vivadent IPS Empress CAD Chairside - de-en-es-it-ru - Manual (Page 67)

19
Polishing
OptraFine, the specially developed, high performance chairside diamond polishing
system for ceramic materials combines the highest efficiency with outstanding
polishing results. With regard to both low surface roughness and
outstanding aesthetic gloss, OptraFine leaves nothing left to be desired.
In contrast to other ceramic polishers, OptraFine is autoclavable and
therefore reusable. OptraFine is available in the shapes
"flame", "cup", and "disc".
Polishing is carried out in three steps:
– Finishing/smoothing out of the surfaces using the Finisher F
– Polishing using the Polisher P
– Polishing to a high gloss using the high-gloss brush and diamond polishing paste HP
Variolink ® Veneer
Purely light-curing luting composite in 7 "Value" shades for the adhesive cementation
of translucent all-ceramic restorations with a layer thickness of < 2.0 mm (veneers,
inlays, onlays).
Multilink ® Automix
The universal, self-curing (with light-curing option) resin based luting cement Multilink
offers a broad range of indications and produces very high adhesive strength on all
material surfaces. Together with the self-etching Primer, which is applied as a simple
preliminary layer on enamel and dentin, Multilink is processed quickly and efficiently.
LED lights of the bluephase ® family are used for the polymerization of light-curing
and dual-curing adhesive composites. The high light intensity achieved with bluephase
permits comparatively short polymerization times with simultaneous good polymeriza-
tion depth.
Especially for the demanding polymerization of adhesively cemented all-ceramic
restorations, bluephase 16i is used. In the process, the entire strength of the high
performance LED is utilized. All-ceramic restorations are incorporated as quickly as
possible.