Ivoclar Vivadent IPS Empress CAD Chairside - de-en-es-it-ru - Manual (Page 53)

5
Uses
Indications
IPS Empress CAD blocks can be used for the following adhesively cemented restorations. Depending on
the type and size of the restoration, the respective HT (High Translucency), LT (Low Translucency), or
Multi Block is recommended. IPS Empress CAD restorations may be cemented and either polished,
stained/glazed, or veneered.
For further processing of IPS Empress CAD restorations, users have the following options:
– Aesthetic characterization and glazing of fully anatomical restorations using IPS Empress Universal
Shades, Stains, and Glaze pastes.
– Aesthetic veneering in the incisal third of reduced restorations (veneers and anterior crowns) using
IPS Empress Esthetic Veneer materials
Contraindications
– Bridge reconstructions
– Conventional cementation
– Very deep, subgingival preparations
– Patients with severely reduced residual dentition
– Bruxism
– Fully (circularly) veneered anterior and posterior crowns using IPS Empress Esthetic Veneer
Important processing restrictions
Failure to observe the following restrictions may compromise the success achieved with IPS Empress CAD:
– The fully anatomical IPS Empress CAD restorations must not fall below the required minimum
thickness
– The reduced (cut-back) IPS Empress CAD restorations must not fall below the required minimum
thickness
– The maximum layer thickness of IPS Empress Esthetic Veneers layering materials must not be exceeded
– IPS Empress CAD restorations must not be stained using materials other than IPS Empress Universal
Shades, Stains, and Glaze
– Powder materials must not be mixed with paste materials
– The blocks must not be milled in a non-compatible CAD/CAM system
Side effects
If patients are known to be allergic to any of the ingredients of IPS Empress CAD, the material should
not be used.
HT Blocks
(High Translucency)
Higher translucency and
chameleon effect
Lower brightness value
– Inlays
– Onlays
– Veneers
LT Blocks
(Low Translucency)
Lower translucency and
chameleon effect
Higher brightness value
– Anterior and posterior crowns
– Partial crowns
– Veneers
Multi Blocks
True-to-nature transition
of shade, translucency, and
fluorescence
– Anterior and posterior crowns
– Partial crowns
– Veneers