Connecting the cnc to a workgroup – Hypertherm V9 Series Phoenix Rev.11 User Manual

Page 236

Text mode
Original mode

236

Phoenix 9.76.0 Installation and Setup Manual 806410

11 – Networking

Connecting the CNC to a Workgroup

The CNC can be set up as a member of a workgroup. If you are going to connect the CNC to a workgroup, you will need
to enter the workgroup name in the System Properties of Windows XP.

To connect to a workgroup:

1. Press Alt + F4 to return to the Windows desktop.

2. Select Start > Settings > Control Panel.

3. Double-click on the System icon.

This manual is related to the following products:

V9 Series Phoenix Rev.9 EDGE Pro HyPath Shape Cutting Control Rev.4 EDGE Pro Picopath Shape Cutting Control Rev.3 EDGE Pro SERCOS II Shape Cutting Control Rev.4 EDGE Pro SERCOS III Shape Cutting Control Rev.4 EDGE Pro Ti Shape Cutting Control Rev.2 MAXPRO200 Rev.2