Hypertherm V9 Series Phoenix Rev.11 - Manual (Page 130)

130 Phoenix 9.76.0 Installation and Setup Manual 806410
4 – SERCOS setup
RECO/Beckoff I/O at Address 50: Select Yes if the Indramat RECO or Beckoff I/O module is being used to expand
the total number of I/O on the fiber optic ring.
 The RECO I/O will populate the general purpose I/O (both analog and digital) following
all drive I/O.
HPR/4070 at address 60: Select Yes if the optional SERCOS interface for HPR/4070 is being used.
HTA I/O at Address 70: Select Yes if the optional Hypertherm SERCOS interface card is being used.