Watch window setup for the maxpro200 – Hypertherm V9 Series Phoenix Rev.11 User Manual
Page 172
172
Phoenix 9.76.0 Installation and Setup Manual 806410
7 – Plasma Setup
Watch Window setup for the MAXPRO200
The Watch Window is the configurable part of the main screen that enables you to display up to 10 different monitoring
setups for more convenient access to specific process-related parameters during cutting. Adding System Errors to the
Upper Location or Middle Location of a Watch Window configuration enables you to see error messages in Phoenix
when cutting with the MAXPRO200.
You can select the Watch soft key on the Setups screen to select the parameters you want to appear in the Watch
Window. Refer to the “Cutting screen and Watch Window setup” section in the
Phoenix Operator’s Manual (806400)
for instructions on how to select your Watch Window parameters. Your Watch Window selections will vary slightly
based on the CNC I/O configuration and machine options you have enabled.
Add System Errors to the Watch
Window setup here...
...to have them display on the Main
screen here.