Hypertherm V9 Series Phoenix Rev.11 - Manual (Page 220)

220 Phoenix 9.76.0 Installation and Setup Manual 806410
10 – Motion Compensation
The next figure is based on the previous example. The laser interferometer calculates the position deviation listed at the 3
targets while mapping the rail axis and then saves the data to a file. In this example, exaggerated deviations are used to
clarify how the data are used.
X0 Y1.5
X0 Y3
X0 Y4.5
X0 Y6
X0 Y9
X0 Y12
0.125
0.25
0.375
0.625
X0 Y0
Target 1
Position deviation = 0 inches
Target 2
Position deviation = 0.5 inches
Target 3
Position deviation = 0.75 inches