Hypertherm V9 Series Phoenix Rev.11 User Manual

Page 215

Text mode
Original mode

Phoenix 9.76.0 Installation and Setup Manual 806410

215

9 – Motion Control

Command Voltage allows the user to view directional motion command voltage being sent to the amplifier for velocity
drives. This displayed voltage also equates to current being commanded for motion in current drives. Peak voltage can be
displayed for a specified amount of time.

This manual is related to the following products:

V9 Series Phoenix Rev.9 EDGE Pro HyPath Shape Cutting Control Rev.4 EDGE Pro Picopath Shape Cutting Control Rev.3 EDGE Pro SERCOS II Shape Cutting Control Rev.4 EDGE Pro SERCOS III Shape Cutting Control Rev.4 EDGE Pro Ti Shape Cutting Control Rev.2 MAXPRO200 Rev.2