Expanded i/o – Hypertherm V9 Series Phoenix Rev.11 User Manual

Page 201

Text mode
Original mode

Phoenix 9.76.0 Installation and Setup Manual 806410

201

8 – Diagnostics

Expanded I/O

For CNCs equipped with more than 64 I/O, a series of selection soft keys are available to access the required inputs,
outputs and analog I/O.

Note: The optional USB Front Panel I/O is not accessible from the I/O Diagnostics screen. Functionality for the
USB Front Panel can be tested through the Keyboard Diagnostics.

This manual is related to the following products:

V9 Series Phoenix Rev.9 EDGE Pro HyPath Shape Cutting Control Rev.4 EDGE Pro Picopath Shape Cutting Control Rev.3 EDGE Pro SERCOS II Shape Cutting Control Rev.4 EDGE Pro SERCOS III Shape Cutting Control Rev.4 EDGE Pro Ti Shape Cutting Control Rev.2 MAXPRO200 Rev.2