Hypertherm V9 Series Phoenix Rev.11 - Manual (Page 203)

Phoenix 9.76.0 Installation and Setup Manual 806410 203
8 – Diagnostics
Drives and Motors
The Drives and Motors diagnostic screen allows a technician to send a direct signal to the drive amplifiers for testing,
without enabling the servo loop.
Select OK on the warning window:
Enter the machine password to view the Drives and Motors screen:
Pulse Type: Select the kind of pulse, single or repeated, that is sent to the drive amplifier. If you select a repeated pulse,
the signal continues until the Test soft key for that axis is pressed again.
WARNING
Drive motors must be removed from the table to prevent unplanned motion.