Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 99)

Target modules
G&D DVICenter · 97
How to enable or disable the »Multiuser« information for the entire system:
1. In the directory tree, click KVM matrix systems > [Name] > Matrix switches .
2. Right-click the master matrix switch and click the Configuration entry on the con-
text menu.
3. Use the Multiuser display entry in the Configuration column to choose between the
following options:
4. Click OK to save your settings.
How to (de)activate the »Multiuser« information for a particular user account:
1. In the directory tree, click User area > User .
2. Right-click the user account you want to configure and click the Configuration
entry on the context menu.
3. Click the Matrix system > Personal Profile > Matrix switch tabs and use the
Multiuser display entry to choose between the following options:
4. Click OK to save your settings.
Showing the status information of a target module
With the context menu of a target module you can call an interface with various sta-
tus information of the target module. In addition to the name and the storage loca-
tion, information regarding the firmware version is displayed.
How to show the status information of a target module:
1. In the directory tree, click
KVM Matrix systems > [Name] > Target modules .
2. Right-click the target module whose status information you want to view and
click the Information entry on the context menu.
Yes: Enables the »Multiuser« display
No: Disables the »Multiuser« display
system: global system settings do apply (see above)
on: displays »Multiuser« information
off: does not display »Multiuser« information