Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 136)

Power switch
134 · G&D DVICenter
Rights to switch the power outlets of a target group
How to change the right to switch the power outlet(s) assigned to the target mod-
ules of the group:
1. Click on the
User area > Users entries in the tree view to change this right.
If you want to change this right for a user group, click on User area > User groups .
2. Right-click the user account or the user group you want to configure and click the
Configuration entry in the context menu.
3. Now click the Matrix system > Device group rights tabs.
4. Select the desired target module in the list field on the left-hand side.
5. Use the Target Power entry to select between the following options:
6. Click OK to save your settings.
Configuration
Assigning a power switch power outlet to the target module
If at least one G&D Hardboot CCX power switch is provided to the system, one or
more power outlets can be assigned to a target module.
Afterwards the assigned power outlets can be switched in the Operation menu of the
consoles’ on-screen display.
How to change the assigned power switch outlets:
1. Click the
KVM Matrix systems > [Name] > Target modules entries in the tree view.
2. Right-click the target module and click the Assign power outlet… entry in the con-
text menu.
A new window provides a list of all available and already assigned power switch
power outlets. Here, you can assign power outlets to the target module or delete
existing assignments.
The interface consists of two tables, which list the power switch power outlets of
the KVM matrix system:
yes: Allow the switching of the power outlets that are assigned to the tar-
get modules of the selected group.
no: Deny the switching of the power outlets that are assigned to the target
modules of the selected group.
Available power
outlet(s):
lists the power outlets that are not assigned to this target
module
Assigned power
outlet(s):
lists the power outlets that are assigned to this target module