Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 184)

CDS multihead groups
182 · G&D DVICenter
The workplace on the right-hand side shows the display ranges of the video channels
of the multihead computers. Each display range is transmitted by a separate target
module.
The display ranges are displayed as rectangles. The name of the target module and
the resolution of its display range is displayed inside of the rectangle.
You can arrange the individual display ranges into horizontal or vertical order or in
blocks. Blocks must be put together into complete quadrangles. L-shaped arrange-
ments are not supported.
Click on the icon (left arrow) to delete the selected rectangle from the workplace.
At default zoom level, the workplace is displayed in units of 4 × 4. You can adjust
the size of the display range:

Click on (zoom in) or press Ctrl+[+] to make the workspace bigger. At maxi-
mum zoom level, the workspace is displayed in units of 2 × 2.
 Click on (zoom out) or press Ctrl+[-] to make the workspace smaller. At mini-
mum zoom level, the workspace is displayed in units of 16 × 16 (default).
 You can reset the default zoom level by pressing Ctrl+0 .
IMPORTANT: The display range entered in the workplace must reflect the computer’s
entire display range!
ADVICE: You can also use »drag and drop« mouse operations or the module’s con-
text menu to delete rectangles from the workspace.
NOTE: The maximum size of the workspace adjusts dynamically when you move
an element over the available workspace.
You can expand the default size of 16 ×16 units as far as you wish.