Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 127)

Automatically or manually switching the target modules
G&D DVICenter · 125
6. Use the drop down menu to select the type of target modules to be displayed in
the select window. The following options are available:
7. The interface consists of two tables that list the user accounts of the KVM matrix
system:
8. Mark the target module you want to add to or delete from the scanmode set.
9. Click the button (right arrow) to add the target module to the scanmode set or
the button (left arrow) to delete it from the scanmode set.
10.Click OK to save your changes.
Assigning a scanmode set to a user account
By assigning a scanmode set to a user account, the target modules selected in the set
are accessed when performing the Autoscan, Autoskip or Stepscan function.
How to assign a scanmode set to the user account or cancel the existing assignment:
1. Click on the User area > User entries in the tree view.
2. Right-click on the user account to be configured and click Configuration in the con-
text menu.
3. Click the Matrix systems > Personal Profile > Matrix switch tabs.
4. Select the scanmode set to be activated in the Scanmode set entry .
5. Click OK to save your settings.
[All targets] Displays all target modules within the system.
[Not assigned] Only displays the target module that are [Not assigned] to
the view filter.
Search... This option opens another window. Select the desired View
filter in the tree view to only display the herein contained
devices in the select window.
Not assigned Lists the target modules that are not assigned to the scan-
mode set
Assigned targets Lists the target modules that are assigned to the scanmode
set