Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 98)

Target modules
96 · G&D DVICenter
How to change the colour depth of the image data you want to transmit:
1. In the directory tree, click KVM Matrixsystems > [Name] > Target modules .
2. Right-click the target module you want to configure and click on Configuration on
the context menu.
3. Use the Colour depth entry of the Target module configuration paragraph to choose
between the following options:
4. Click OK to save your settings.
Enhanced functions
Enabling/disabling the keyboard signal
By default, the signals of mouse and keyboard connected to the user module are
transmitted to the target module.
The settings of the target module let you enable or disable the transmisison of the
keyboard signal.
How to enable/disable the transmission of the keyboard signal:
1. In the directory tree, click
KVM matrix systems > [Name] > Target modules .
2. Right-click the target module you want to configure and click on Configuration on
the context menu.
3. Under Keyboard support , select one of the following options:
4. Click OK to save your changes.
»Multiuser« display
If several users are accessing a target computer (Multiuser mode), the »Multiuser«
information can be activated. This way, all accessing users are provided with the
information that at least one other user is currently accessing the target computer.
24 Bit: transmits the image data with a maximum colour depth of 24 bits
18 Bit: reduces the colour depth of image data to 18 bits
Enabled: Keyboard signals are transmitted to the target module
(default)
Disabled: Keyboard signals are not transmitted to the target module.
NOTE: The setting to display this information is usually configured for the entire
system and individually for each user account.
Both options are described on this page.