Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 124)

Automatically or manually switching the target modules
122 · G&D DVICenter
Scanning the target modules manually (Stepscan)
By pressing a key, the Stepscan function successively accesses all target modules that
are indicated in the scanmode set and approved for the user.
When accessing the target modules, the workplace name, the name of the currently
accessed target module, and a note regarding the Stepscan function are displayed.
Starting and stopping the Stepscan function
Configuring keys to scan the targets manually
By pressing a key, the Stepscan function successively switches to all target modules
that are available to the user.
You can select different keys to access the next (default Up ) or the previous (default
Down ) target module.
How to select the keys for using the Stepscan function:
1. Click on the User area > User entries in the tree view.
2. Right-click on the user account to be configured and click Configuration in the con-
text menu.
3. Click the Matrix systems > Personal Profile > Matrix switch tabs.
4. Use the Stepkeys entry to select between the following options:
5. Click OK to save your changes.
Requirements for using this function:

Creating a scanmode set (see page 123)
 Assigning a scanmode set to a user account (see page 125)
 Configuring keys to scan the targets manually (see page 122)
Up/Down: arrow keys Up and Down
PgUp/PgDn: page  and page  keys
Num Up/Down: arrow keys Up and Down of the numeric keypad
Num PgUp/PgDn: page  and page  keys of the numeric keypad
Num +/- plus and minus keys of the numeric keypad