Monitoring functions – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 44
Monitoring functions
42 · G&D DVICenter
Monitoring functions
The current monitoring values of all devices within the KVM system can be viewed in
the device-specific branches (e.g. KVM matrix systems) as well as in the KVM Combina-
tions and Critical Devices branches of the tree view.
The various information regarding a device can either be displayed in individual val-
ues or in monitoring groups, which are sorted according to topic. The following
exemplary figure shows the Status values and three different monitoring groups:
Individual values (the Status value in the figure above) immediately show if the status is
correct (green) or deviating from the normal operating value (red). The text in the col-
umn also provides information about the current status.
Monitoring groups allow you to group various individual values. The column of a
monitoring group shows if all values are within range (green) or if at least one value is
deviating from the normal operating values (red).
Clicking the arrow in the column opens a separate window, which displays the indi-
vidual values of the group.
Figure 4: Detailed view of an exemplary monitoring table