Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 95)

Target modules
G&D DVICenter · 93
 Generic HID mode:  In this mode, the data from the USB devices connected to the
top Keyb./Mouse interface is transmitted to the active target module.
 Controller: With ShuttlePRO v2 multimedia controllers, you can operate audio and
video programs. You can use a special USB keymode to operate computers con-
nected to the target module using the controller:
 LK463 compatible keyboard: You can connect an LK463 compatible keyboard to the
user modules of the KVM matrix system. The order of the 108 keys of these keyboards
is the same as the OpenVMS keyboard layout.
A special USB keyboard mode guarantees that the keypress of a special key on this
keyboard is forwarded to the target computer:
How to select a USB keyboard mode:
1. In the directory tree, click
KVM matrix systems > [Name] > Target modules .
2. Right-click the target module you want to configure and click on Configuration on
the context menu.
3. Select a setting under USB HID Mode (see table on page 92):
4. Click OK to save your settings.
INPUT DEVICE SETTING
Any USB device  Generic HID
IMPORTANT: The Generic HID mode supports many common HID devices. How-
ever, the operation of any particular HID devices in Generic HID mode cannot be
guaranteed.
IMPORTANT: To use a generic HID device, you need to activate the Generic HID sup-
port of the user module to which the USB device is connected to (see page 104).
INPUT DEVICE SETTING
Contour ShuttlePRO v2  Contour SP2
INPUT DEVICE SETTING
LK463 compatible keyboard  LK463
NOTE: Update the firmware of both the matrix switch and the user module if the
web application does not show all keyboard modes.
IMPORTANT: After changing the keyboard layout of Sun Keyboards, Sun computers
require a reboot.