Viewing the status information of a target module – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 138
Power switch
136 · G&D DVICenter
Viewing the status information of a target module
Use the context menu of a target module to call an interface with various status
information of the target module.
1. Click the
KVM Matrix systems > [Name] > Power switches
entries in the tree view.
2. Right-click on the power switch. Now click the
Information
entry in the context menu.
3. The opening interface provides the following information:
4. Click
Close
to close the window.
Name:
displays the power switch name
Status:
shows status of the power switch (on or off)
Comment:
user comment regarding the power switch
Name:
name of the matrix switch the power switch is connected to
Device ID:
device ID of the matrix switch to which the power switch is
connected to
Class:
device class of the matrix switch to which the power
switch is connected to
NOTE:
The Outlets paragraph lists all channels of the power switches. The table
also lists which target module is assigned to the power switch.