Setting the hold time for the screensaver, Viewing the cascade information – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 110
![background image](https://www.manualsdir.com/files/788354/content/doc110.png)
User consoles
108 · G&D DVICenter
How to remember the username in the login mask:
1. In the directory tree, click
KVM matrix systems > [Name] > User modules
.
2. Right-click the user console you want to configure. Now, click
Configuration
on the
context menu.
3. Click on the
General
tab.
4. Use the
Remember last user
entry to select between the following options:
5. Click
OK
to save your settings.
Setting the hold time for the screensaver
The screensaver deactivates the screen display at the user console after the user has
been inactive for an amount of time you can adjust.
How to set the hold time of the screensaver:
1. In the directory tree, click
KVM matrix systems > [Name] > User modules
.
2. Right-click the user console you want to configure. Now click on
Configuration
on
the context menu.
3. Click on the
General
tab.
4. Use the
Screensaver (min)
entry to set the holding time (
1
to
99
minutes) for activat-
ing the screensaver.
5. Click
OK
to save your settings.
Viewing the cascade information
The cascade information provides you with an overview of the physical connections
of the KVM matrix system. In addition to the master device, the connected slave
devices, user consoles, and target modules.
The cascade information also displays the physical device ID, the connection port at
the KVM matrix system, and the status.
yes:
the system remembers the last user
no:
the system does not remember the last user
NOTE:
This setting operates independently from the screensaver settings of the tar-
get computer.
NOTE:
The value »0« deactivates the screensaver of the user console.