Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 135)

Power switch
G&D DVICenter · 133
Power switch
Integrating a power switch (G&D Hardboot CCX) into the KVM matrix system allows
you to use the system for (de)activating the power supply of the devices.
For this purpose, one or several power outlets are assigned to a target module. After-
wards these outlets can be switched in the Operation menu.
Rights administration
Rights to switch the power outlets of a target module
How to change the rights to switch the power outlet(s) assigned to a target:
1. Click on the User area > Users entries in the tree view to change this right.
If you want to change this right for a user group, click on User area > User groups .
2. Right-click the user account or the user group you want to configure and click the
Configuration entry in the context menu.
3. Now click the Matrix systems > Individual device rights tabs.
4. Select the desired target module in the list field on the left-hand side.
Use the drop-down menu to select the target module to be displayed in the selection
window.
Select between the following options:
5. Use the Target Power entry to select between the following options:
6. Click OK to save your settings.
[All targets] lists all target modules of the system.
[Unassigned] only lists the target modules of the [Unassigned] view.
Search... After this option has been selected, another window
opens. Select the desired View filter in the tree view to dis-
play only the therein contained devices.
yes: Allow the switching of the power outlets that are assigned to the selected
target module.
no: Deny the switching of the power outlets that are assigned to the selected
target module.