Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 134)

Configuring the On-Screen Display (OSD)
132 · G&D DVICenter
Operating the on-screen display by mouse
In the default settings of the KVM matrix system, the on-screen display (OSD) can
only be called with a configured key combination.
If a Microsoft »IntelliMouse Explorer« or another compatible mouse with five keys is
connected to the user console, you can call the on-screen display through the mouse
keys four and five at the side of the mouse
How to enable/disablethe mouse support to operate the on-screen display:
1. Click on KVM Matrix systems > [Name] > User modules .
2. Right-click the console to be configured. Now, click the Configuration button on
the context menu.
3. Use the OSD by Mouse entry under User console config to select one of the following
options:
4. Click OK to save your settings.
Enabling/disabling the on-screen display
This function defines if the users at the user module are enabled to activate the on-
screen display or if they are only allowed use select keys for the switching.
How to enable/disable the on-screen display:
1. Click on KVM Matrix systems > [Name] > User modules .
2. Right-click the console to be configured. Now, click the Configuration button on
the context menu.
3. Use the OSD blocked entry under User console config to select one of the following
options:
4. Click OK to save your settings.
Yes: Opens the OSD via mouse key 4 and 5 of a compatible mouse
No: Disables the possibility to call the OSD by mouse
Yes: On-screen display blocked
No: On-screen display available