Adjusting the bus address of matrix switches – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 148
Expanding switchable signals
146 · G&D DVICenter
When using three matrix switches, for example, you can transmit a second video
signal and USB 2.0 signals in addition to the standard signals of a user module
(video signal and keyboard and mouse signals):
Adjusting the bus address of matrix switches
The primary matrix switch automatically makes the stack matrix switches access the
same port that the user accesses at the primary matrix switch.
This requires the correct setting of the bus address in the individual matrix switches.
How to change the bus address of a matrix switch:
1. Click on
KVM Matrix systems > [Name] > Matrix switches
in the tree view.
2. Right-click the matrix switch and click the
Configuration
entry on the context
menu.
3. Choose
System
and press
Enter
.
4. Choose
Bus address
and select one of the following options:
5. Press
OK
to close the window.
Matrix switch
User module
Signals
Matrix switch 1 (Primary)
DVI-CON
DVI, PS/2, USB
Matrix switch 2 (Satellite 1)
DVI-CON-Video
DVI
Matrix switch 3 (Satellite 2)
U2-R-CON
USB 2.0, RS 232
primary:
The central module is operated by the user.
It switches the satellite matrix switches automatically.
satellite 1 … 9:
Assign the addresses continuously to the individual stacking
matrix switches.