Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 160)

IP-Control-API (option)
158 · G&D DVICenter
Configuring accesses for text-based control
Use the web application Config Panel to configure the service for text-based control.
In the web application, you can define »remote control« accesses and their settings.
How to create a new access or edit existing accesses:
1. In the directory tree, click KVM Matrix systems > [Name] > Matrix switches .
2. Right-click the device you want to configure and click Configuration on the context
menu.
3. Click on Network> Remote Control .
4. To create a new access, click Add .
To adit an existing access, click Edit .
5. Enter or edit the following data:
6. Click OK to save your settings and to close the window.
IMPORTANT: Text-based control is only possible with these accesses.
Access: Select the protocol ( TCP ) or ( UPD ) you want to use for text-
based communication.
Port: Enter the port you want to use for text-based communica-
tion.
Status: Select if the access is enabled or disabled .
Encryption: The following types of encryption are supported:
 unencrypted: Select None to transmit the data without
encryption (default).
 partly encrypted: Select Password: CBC-3DES ,
to transmit only login passwords with encryption.
 encrypted: Select CBC-3DES to transmit date entirely
encrypted.
Key: After enabling an encryption method, enter the key.
Some encryption modes require an additional initialisation
vector. If necessary, enter the key followed by a colon (:) and
the initialisation vector.