Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 172)

CrossDisplay Switching
170 · G&D DVICenter
Configuration
Enabling »CrossDisplay Switching«
If you want to use the CrossDisplay Switching feature, we recommend enabling the fea-
ture for the entire system. The feature applies for all target modules that use the set-
tings for the entire system (standard).
You can override the systemwide settings for each target module and enable or disa-
ble CrossDisplay Switching for certain target modules only.
How to change the system settings of the »CrossDisplay Switching« feature:
1. In the directory tree, click KVM matrix systems > [Name] > Matrix switches .
2. Right-click the matrix switch, and click Configuration on the context menu.
3. Click the General tab.
4. Under CrossDisplay Switching , you can choose between the following options:
5. Click OK .
How the change »CrossDisplay Switching« settings of target modules:
1. In the directory tree, click KVM matrix systems > [Name] > Target modules .
2. In the display range, right-click the target module you want to configure, and
click Configuration on the context menu.
IMPORTANT: Before you can configure the CrossDisplay Switching feature, you need
to enable the premium Tradeswitch function (see page 159) and create a Tradeswitch
configuration (see page 159).
ADVICE: You can also disable the system settings and enable CrossDisplay Switching
only in settings of target modules on which you want to use the feature.
Disabled: CrossDisplay Switching is disabled for the entire system.
Enabled: CrossDisplay Switching is enabled for the entire system.
ADVICE: You can enable or disable CrossDisplay Switching for certain modules
independently of the selected system settings (see below).