Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 101)

Target modules
G&D DVICenter · 99
How to view the cascade information:
1. In the directory tree, click KVM Matrix systems > Name > Target modules .
2. Right-click the target module and click the Cascade info entry on the context menu
to view the cascade tree directory:
3. The cascade information provides the following information:
4. Click Close to close the cascade view.
Updating the firmware of target modules
You can use the web application to update the firmware of target modules.
How to update the firmware of target modules:
1. In the directory tree, click KVM matrix systems > [name] > Target modules .
2. Mark the user modules you want to update in the main view.
3. Right-click one of the marked devices and select Update on the context menu.
4. Use the Update type entry to define whether the selected devices are to be updated
one after the other ( sequential ) or at the same time ( parallel ).
5. Click Search and use the file dialog to select the location and the name of the
update file.
6. Click Start update .
NOTE: The context menu of the matrix switch with which you call the cascade
information is highlighted in red.
 Name, port and status of the connected user modules
 Name, port and status of the connected target modules
 Name and ports of slave devices
ADVICE: Right-click the table and select Column view > Information to show the
module’s firmware version.
IMPORTANT: Only mark target modules for which the update file to be selected
in the following has been designed for!
ADVICE: Keep the Ctrl key pressed to select several devices from the list.
NOTE: The System monitoring > Update failed directory provides the protocols of
failed updates.