Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 158)

Push-Get function (option)
156 · G&D DVICenter
Push-Get function (option)
The Push-Get function enables you to push the image to or get the image from any
computer connected to the KVM matrix system to the display of another user con-
sole.
This way, you can exchange and edit display contents.
The addressed user console can be a standard console or a large screen projection,
for example.
Changing the right for carrying out the Push-Get function
How to change the right for using the Push-Get function:
1. Click the
User area > Users entries to change this right for a user account.
If you want to change this right for a user group, click on User area > User groups .
2. Right-click the user account or the user group you want to configure. Now, click
on Configuration .
3. Click the Matrix systems > Individual device rights tabs.
4. Select the Consoles option in the drop-down menu.
5. Choose the desired user module in the list field.
6. Use the Push-Get entry to select one of the following options:
7. Click OK to save your settings.
NOTE: The functions and settings described in this chapter are only available if the
Push-Get function has been purchased.
IMPORTANT: This setting is only available if the additional Push-Get function has
been activated.
yes: enables the usage of the Push-Get function
no: denies the usage of the Push-Get function