Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 24)

Basic configuration of the web application
22 · G&D DVICenter
4. Click OK to save the data.
Configuring the global network settings
Even in complex networks the global network settings ensure that the web applica-
tion is available from all sub networks.
How to configure the global network settings:
1. Click the tools symbol in the toolbar.
2. Click the Network > Interfaces tabs.
3. Enter the following data in the Global network settings section:
4. Click OK to save your data.
Netmask: Only if the Static operating mode is selected: Enter the net-
work netmask.
Connection
type:
Select if the network interface and the remote station are to
negotiate the connection type automatically ( Auto ) or if one
of the available types is to be applied.
Global prefer-
ences:
Use the pull-down menu to select the operating mode:
 Static: uses static settings.
 DHCP: obtains the settings from a DHCP server.
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS Server 1: Enter the DNS server IP address.
DNS Server 2: Optionally, enter the IP address of another DNS server.
The following settings are automatically obtained in the DHCP operating
mode. Inputs are not possible.