Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 100)

Target modules
98 · G&D DVICenter
3. This interface provides the following information:
4. Click Close to close the window.
Showing information about the connection
The connection information is the active connection between a user and a target
module. The different cable lengths between two modules of the KVM matrixswitch
are listed separately. This list does not only display the ports used for the cable con-
nection but also the medium and the transmittable signals.
How to view the information regarding the connection:
1. In the directory tree, click KVM Matrix systems > [Name] > Target modules .
2. Right-click the target module and click on Active connection on the context menu.
3. The list displays the following information about the different cable lines
between two modules of the KVM matrix switches:
4. Click Close to close the window.
Viewing the cascade information
The cascade information provides you with an overview of the physical connections
of the KVM matrix system. In addition to the master device, the connected slave
devices as well as the user modules and target modules are displayed.
The cascade information also displays the physical device ID, the connection port at
the KVM matrix system and the status.
Name: target module name
Device ID: physical ID of the target module
Status: current status (on or off) of the target modules
Folder: folder to which the target module is assigned to
Comment: user comment regarding the target module
Firmware name: firmware name
Firmware revision: firmware version
 Name and ports of two connected modules
 Medium of the cable connection
 Information regarding the transmittable signals:
[K]eyboard, [V]ideo, [M]ouse, and [A]udio