Guntermann & Drunck DVICenter DP16 Config Panel - Manual (Page 130)

Configuring the On-Screen Display (OSD)
128 · G&D DVICenter
4. Use the Hotkey scancode entry to select one of the following options:
5. Click OK to save your settings.
Opening the on-screen display via double keypress
In addition to opening the on-screen display (OSD) via hotkey (see above), you can
open the OSD by pressing a previously selected key twice ( Ctrl , Alt , Alt Gr , Win , Shift
or Print ).
How to enable/disable opening the on-screen display via double keypress:
1. In the directory tree, click on KVM matrix systems > [Name] > Matrix switches .
2. Right-click the master matrix switch and click Configuration on the context menu.
3. Under OSD via double keypress, select one of the following options:
4. Click OK to save your settings.
Adjusting the information display
When switching to a target module, a temporary information display (5 seconds)
opens. The display informs you about the console name, the name of the currently
accessed target module and provides further information.
The information display can also be permanently displayed or deactivated. The selected
setting is assigned to your user account and stored in your Personal Profile.
Num Num key
Pause Pause key
Insert Insert key
Delete Delete key
Home Home key
End End key
PgUp Page Up key
PgDn Page Down key
Space Space key
Off The OSD can be opened only by pressing the hotkey.
Ctrl , Alt , Alt Gr ,
Win , Shift or Print
The OSD can also be opened by pressing the selected key
twice.
ADVICE: When active, the temporary information can be recalled by pressing
Ctrl+Caps Lock .