Showing ports modes – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 22
Getting started
20 · G&D DVICenter
3. Click
OK
to apply your changes.
Showing ports modes
1. In the directory tree, click
KVM matrix systems > [Name] > Matrix switches
.
2. Right-click the matrix switch whose port mode you want to show. Now, click on
Port LEDs > Show port types
on the context menu.
3. Now, the port LEDs show the current port mode:
4. To restore the standard mode, right-click the matrix switch again. Now, click on
Port LEDs > Show status
on the context menu.
IMPORTANT:
After changing the port assignment, the matrix switch restarts.
LED
Standard mode
Compatibility mode
Yellow
Up mode
Connection of user modules (
CON mode
)
Green
Down mode
Connection of target modules (
CPU mode
)
NOTE:
While showing the port mode, the Identification LEDs on the device’s
front and back are blinking.