Updating the firmware of user consoles – Guntermann & Drunck DVICenter DP16 Config Panel User Manual
Page 112
User consoles
110 · G&D DVICenter
Updating the firmware of user consoles
You can use the web application to update the firmware of user consoles.
How to update the firmware of user consoles:
1. In the directory tree, click
KVM matrix systems > [Name] > User modules
.
2. Mark the user modules to be updated in the main view.
3. Right-click one of the marked devices and select
Update
on the context menu.
4. Use the
Update type
entry to define whether the selected devices are to be updated
one after the other (
sequential
) or at the same time (
parallel
).
5. Click
Search
and use the file dialog to select the location and the name of the
update file.
6. Click
Start
update
.
ADVICE:
Right-click the table and select
Column view > Information
to show the
module’s firmware version.
IMPORTANT:
Only mark user consoles for which the update file to be selected
in the following has been designed for!
ADVICE:
Keep the
Ctrl
key pressed to select several devices from the list.
NOTE:
The
System monitoring > Update failed
directory provides the protocols of
failed updates.